datAshur PRO Hardware Encrypted Flash Drive by iStorage

Easy to Use

Simply enter a 7-15 digit PIN to authenticate and use as a normal flash drive. When the drive is disconnected, all data is encrypted (full disk encryption) using AES-XTS 256-bit hardware encryption (no software required).

This device is FIPS 140-2 Level 3 Certified, with tamper proof & evident design.

All data stored on the drive is encrypted using FIPS PUB 197 validated, AES-XTS 256-bit hardware encryption. All components incorporated within the device are completely covered by a layer of super tough epoxy resin, which is virtually impossible to remove without causing permanent damage to the components. The drive is also designed to be tamper evident making it obvious if it has been pried open and tampered with. 

The onboard keypad is covered by a layer of polymer coating that protects the keys and hides key usage to avoid tipping off a potential hacker to commonly used keys.

This drive has been validated to the following government accreditation standards:

• FIPS 140-2 Level 3
• NLNCSA DEP-V
• NATO Restricted level

For a complete list of all iStorage government validated products, click here.

No need to worry about spills.

The drive’s IP57 accreditation means it will survive being submerged under 1m of water for 30 minutes and be deemed fit enough to withstand dust, dirt and sand.

This feature makes the device perfect for corporate and government deployment. If the User forgets their PIN, the drive can be unlocked using the Admin PIN. The Administrator can then allow the User to set a new User PIN.

Both the Admin and User can configure the drive as a read only (write protect) drive. If configured by the Admin, the feature cannot be modified or disabled by the User, allowing the Admin to pre-provision a drive with pre-loaded content as read-only for the User.

Transfer Your Files in Seconds

Lightning fast backwards compatible USB 3.2 Gen 1 data transfer speeds, up to 170MB/s Read Speeds and up to 146MB/s Write Speeds.

OS & Host independent - works across any host and embedded systems

No software required; the drive will work on any device with a USB port.

Compatible with: MS Windows, macOS, Linux, Android, Chrome, Thin Clients, Zero Clients, Embedded Systems, Citrix and VMware

Brute force hack defense mechanism

Intelligently programmed to protect against all forms of brute force attacks.

10 attempts
If the User PIN is entered incorrectly 10 consecutive times, the User PIN will be deleted and the drive can only be accessed by entering the Admin PIN or One-time User recovery PIN. (Admin can change this from the default 10 incorrect PIN entries, to 1-9, for the User only).

If the Admin PIN is entered incorrectly 10 consecutive times, all data, PINs and the encrypted encryption key will be lost forever.

The device will revert back to factory default settings and will need to be formatted before use.

• USB flash drive with Aluminium Sleeve
• Quick Start Guide
• 3 Year Warranty

Auto-Lock

Automatically locks when unplugged from the host computer or when power to the USB port is turned off. It can also be set to automatically lock after a predetermined amount of time.

Drive Reset

Drive Reset deletes the encrypted encryption key, all PINs and renders all data as lost forever. The drive can then be redeployed which randomly generates a new encrypted encryption key, a process that can be repeated as many times as required.

Whitelisting on Networks

Configured with a unique VID/PID and internal/external serial number with barcode, allowing easy integration into standard end-point management software (white-listing), to meet internal corporate requirements.