datAshur PRO+C FIPS 140-3, Level 3 Hardware Encrypted Flash Drive by iStorage

Easy to Use

Simply enter an 8-15 digit PIN to authenticate and use it as a standard flash drive.

All data is encrypted when the drive is disconnected (full disk encryption) using AES-XTS 256-bit hardware encryption (no software required).

FIPS 140-3 Level 3

The datAshur PRO+C holds the distinction of being the world's first and only hardware encrypted drive to be awarded the FIPS 140-3, Level 3 validation certificate! (Certificate #4918)

All data stored on the datAshur PRO+C is encrypted using FIPS PUB 197 validated, AES-XTS 256-bit hardware encryption.

Tamper proof & evident design

All components incorporated within the datAshur PRO+C are completely covered by a layer of super tough epoxy resin, which is virtually impossible to remove without causing permanent damage to the components.

The drive is also designed to be tamper-evident making it obvious to the User if it has been pried open and tampered with.

The onboard keypad is covered by a layer of polymer coating that protects the keys and hides key usage to avoid tipping off a potential hacker to commonly used keys.

The datAshur PRO+C is extremely rugged, surviving a drop of up to 4m onto a concrete surface.

The drive is also crushproof, withstands the weight of a 2.7 ton vehicle.

No need to worry about spills.

The drive’s IP68 accreditation means it will survive being submerged under 1.5m of water for 30 minutes and deemed fit enough to withstand dust, dirt and sand.

This device is perfect for corporate and government deployment. If the User forgets their PIN, the drive can be unlocked using the Admin PIN. The Administrator can then allow the User to set a new User PIN.

Both the Admin and User can configure the drive as a read only (write protect) drive. If configured by the Admin, the feature cannot be modified or disabled by the User, allowing the Admin to pre-provision a drive with pre-loaded content as read-only for the User.

Transfer Your Files in Seconds

Lightning fast backwards compatible USB 3.2 Gen 1 data transfer speeds, up to 310MB/s Read Speeds and up to 246MB/s Write Speeds.

OS & Host independent - works across any host and embedded systems

No software required; the drive will work on any device with a USB port.

Compatible with:MS Windows, macOS, Linux, Android, Chrome, Thin Clients, Zero Clients, Embedded Systems, Citrix, VMware, DVR’s, Medical Equipment, Printers, Scanners, CCTV. In fact, it will work on any device with a USB port!

Brute force hack defense mechanism

Intelligently programmed to protect against all forms of brute force attacks.

10 attempts
If the user PIN is entered incorrectly 10 consecutive times, the user PIN will be deleted. All your data will remain on the device but now you can only access it by entering the admin PIN.

However,
if you enter the admin PIN incorrectly 10 consecutive times, the PIN, encryption key and all data will be lost forever.

The device will revert back to factory default settings and will need to be formatted before use.

• datAshur PRO+C with Protective Sleeve
  
• USB Type-C to Type-A adapter
  
• Quick Start Guide
  
• 3 Year Warranty and lifetime technical support

Auto-Lock

Automatically locks when unplugged from the host computer or when power to the USB port is turned off. It can also be set to automatically lock when idle following a predetermined length of time.

Drive Reset

Drive Reset deletes the encrypted encryption key, all PINs and renders all data as lost forever. The drive can then be redeployed which randomly generates a new encrypted encryption key, a process that can be repeated as many times as required.

Whitelisting on Networks

Configured with a unique VID/PID and internal/external serial number with barcode, allowing easy integration into standard end-point management software (white-listing), to meet internal corporate requirements.